Lonestarlogo 932x449

 
Register online by clicking the "Add to Cart" button.  Click the button only once if you want to place 1 class in your cart.  Clicking more than once will result in the class being placed in your cart the same number of times that you click the button.
 
The first click of the button will open Paypal in a new window.  Leave it open to continue adding classes. You can add and remove classes from this window. Make sure that your class count and the amount is correct before you Check Out.
 
2017 CLASS SCHEDULE
 

WEDNESDAY, AUGUST 16

 

W 1 Bryson W-1

TURTLE GOURD WARRIOR

1:00 - 5:00 pm

$75 ($77 Paypal)

Robin Bryson  This email address is being protected from spambots. You need JavaScript enabled to view it. 

Description:  Create a unique one of a kind Turtle Gourd Warrior. Each piece will look different due to each student’s creative face design and choice of treated exotic bird feathers.

Teacher Provides:  4-5” turtle shell, mini gourd, beads, earrings, leather, arrow head, sinew, warrior staff, a selection of exotic feathers and instrutions.

Students Bring:  Acrylic paints, brushes, transparent acrylic, adjustable wood burner for the face, E6000 glue, carving tool with bits, small bit for drilling holes, an exacto knife, heat gun, extension cord and power strip.

Students will complete the project in class.

 Any skill level.

Walk-ins accepted if class is not full.

 

W 3 Haberer

W-3

Mimbre Pottery

1:00 – 5:00 pm

$65 ($67 Paypal) 

Sue Haberer   This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: You will learn a brief history of Mimbre pottery as well as how to make your own. You will follow the process to make an ancient relic. A finished gourd depends on the detail of design. All gourds will be different due to your creative flow.

Teacher provides: White wash, patterns, water bowls, paper towels, hair dryers and handouts.

Students provide: Gourd bowl, cleaned with inside finished (approx 5.5-6” in dimeter and 4.5-5” tall) , brushes (thin liner, ¼” and 1”), small titanium white paint – either Golden or Liquetex (use the Michaels or Hobby Lobby coupon), pencil/eraser, black paint, flexible ruler and rubber templates (round, square, etc,), finishing spray, wood burner with a skew tip (google skew tip if you are unsure what it is).

Students will not complete the project in class.

All skill levels.

Walk-ins accepted if class is not full.

 

THURSDAY, AUGUST 17

 

T 1 Bryson

T-1     

Native American Inspired Gourd Doll

8:00 am - 5:00 pm

$80.00  ($82 Paypal)

Robin Bryson  This email address is being protected from spambots. You need JavaScript enabled to view it. 

Description: Create a spectacular Native American Inspired Gourd Maiden with beautiful embellishments. Learn how to add yarn for hair.  Each maiden will look different due to the shape and curvature of the gourd. Mounted on a one-of-a-kind petrified wood base.

Teacher provides: beads, blanket, earrings, rivets, yarn, tin cons, porcupine quills, ostrich shell piece, raffia, leather strip and the petrified wood base. Plus tutorial.

Students provide: Banana gourd cut and cleaned. Size of banana gourd 8-9” height. And a small gourd for the head. Cut bottom off the banana gourd and sand level. Cut the top of the banana gourd off, just enough so the head can fit in. Awl, tweezers, Glue E6000 & bring your carver in case we need to round the neck area.

Students will complete the project.

Any level can do this.

Walk-ins accepted if class is not full.

 

T 2 Guidry

T-2

Rainbow & Beads Coiling

8:00 am - 12:00 pm

$65  ($67  Paypal)

Shelia Guidry   This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Gourd provided for class will already be cut, dyed and ready for students to coil. Students will learn how to put small beads on first row of coiling.  Larger beads will be put on forming hills and valleys. Several different colors of Danish cord will be used for coiling.    

Teacher provides: All supplies and gourd will be provide by teacher.

Students provide:  Just a willingness to have fun.

Students will possibly complete the project in class.

Any level can do this.

Walk-ins accepted if class is not full.

 

T 4 Haberer

T-4

Basic Carving

8:00 am – 5:00 pm

Sue Haberer   This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Join relief carver Sue Haberer for a 1-day basic carving class. If this is your fist time to carve or just want to hone your carving skills then this is the class for you. Various carving techniques will be taught and tips will be given to help you make a professional looking gourd.  Information will be given on carving safety, tool usage and care.  Since this is a “techniques” class you will work at your own speed and may or may not complete your gourd during class hours. If time permits, you may decorate your gourd using special pens provided by the teacher, using her Zuni Zen Gourd as an example.

Teacher provides: A few Fila-point burrs for sale, detailed handout, special pens and finishing spray.  

Students provide: Carver (no battery operated tool), cutting wheel, inverted cone, various size ball burrs, fila-point burr (I have a few to sell), sanding paper and drums, small files, mini saw, Xacto knife with sharp blades, dust mask, eye protection, gourd at least ¼” thick and no larger than 6” tall by 7” diameter (cut open and cleaned inside do not paint inside), power strip and extension cord. Tools will be available for sale at the festival.

Students will not complete the project.

This is a beginning level class but any level can do this.

Walk-ins accepted if class is not full.

   

T 6 Hobbs SA 6

T-6

Coiling & Powdered Pigments on Gourds

8:00 am - 5:00 pm

$55.00  ($57 Paypal)

Karen Hobbs   This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Have you ever wanted to experiment with those multi-colored powders before        you purchased? Well here’s your chance! Come play in this fun class to see how many of the ways to mix and match and create a custom look. When you are happy with your custom creation, the gourd’s surface will be sealed. Students will continue by learning the coiling technique with variegated ribbons.

Teacher provides: Pattern, pigments, sealer, gloves, coiling materials and embellishments. A few Dremels to share for those who need them, 3/16 bits.

Students provide: 6-8” diameter gourd x 6” tall, clean, cut with wavey around the top. (refer to the picture) Bring Dremel for drilling holes around the top edge, or you can pre drill with 3/16 bit ¼” from top and ¼” apart.  Paint inside and out with flat black paint.

Students will complete the project.

Any level can do this.

No walk-ins.

 

T 9 Guidry

T-9

Weaving & More Weaving on Gourds

1:00 pm - 5:00 pm

$70  ($72 Paypal)

Description: We will discuss different ways to dye gourds. Students will learn how to determine where to mark to drill holes on front of gourd and on rim of gourd. Twining pattern of weaving will be used to weave gourd with yarn and reed and accented with wooden beads. Gourds will already be dyed and holes drilled so student can have time to finish weaving in class and go home with a finished gourd.

Teacher provides: All supplies – gourd ready to weave on, yarn, reed and beads.

Students provide:  Old towel to place in lap- reed will be wet.                         

Students will complete the project in class.

Any level can do this.

Walk-ins accepted if class is not full.

  

FRIDAY, AUGUST 18

  

F 1 Reichert

F-1

Decaying Wood

9:00 am - 5:00 pm

$75  ($77 Paypal)

Dee Reichert  This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: In this class you will learn how to turn your gourd into a decaying piece of wood. We are not trying to finish an entire gourd but just learn the carving technique. Therefore, we will be working on only one area of your gourd. This process has many steps. Each step is simple but time consuming. This class will take approximately 4-6 hours (with a lunch break) depending on your speed and experience. It’s really fun to watch your gourd rot away! When you finish your decayed area I will have stains available so you can apply the finishing touch which turns it to a wood-like finish.

Teacher provides: Stain, rubber gloves and a tutorial.

Students provide: Any gourd (any size or condition and need to be a minimum of ¼” thick and cut, cleaned and sprayed black inside and sealed with wood hardener), baby wipes, carving tools & bits, apron and dust mask. A list of bits will be emailed to each student. Some examples are: skin removal, round ball cutting burs, small cutting wheels, filigree burs, etc.

Students will not complete the project.

Any level can do this with some knowledge of their carver & burrs.

No walk ins.

 

F 2 Haberer

F-2

Faux Tooling

8:00 am - 12:00 pm

$65  ($67 Paypal)

Sue Haberer   This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Learn the technique of Faux Tooling on a small gourd.

Teacher provides:     Gourd, special pen.

Students provide: Wood burner, skew tip, tiny ball tip, 1/4" angle brush, pencil, eraser, flexible ruler, extension cord, power strip.

Students will complete the project.

Any level can do this.

Walk ins accepted if class is not full.

 

F 5 Hobbs

F-5

Canteen Gourd Purse

8:00 am - 5:00 pm

$70  ($72 Paypal)

Karen Hobbs  This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: This is the purse everyone has been talking about! And the best thing is most of the hard work is already done for you! Students will start with an extra thick gourd that has been cleaned, sanded, reinforced on the inside then dyed and sealed with several coats of sealer. Students will learn how to drill holes to coil weave cording wrapped in luscious fibers to cover the purse top. Various embellishments will be available to accent the bottom portion of the purse. Students will learn to attach a back clasp, strap and front latch.

Teacher provides: Canteen gourd (cut, cleaned, dyed and sealed & ready to embellish), pattern, needles, drill bits, embellishments.   

Students provide:  Scissors, dremel, small needle nose plyers, creativity (Ott light might be helpful). 

Students will complete the project.

Any level can do this.

Walk-ins accepted if class is not full.

 

F 1 Guidry 2

F-8

Twilling & Twining

1:00 pm - 5:00 pm

$70  ($72 Paypal)

Shelia Guidry  This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Students will learn how to weave on a gourd using the continuous twill pattern and twining. Students will learn how to determine how many holes to drill for spokes to make different continuous twilling patterns. Students will also learn twining pattern using 2 or 3 pieces of reed. Gourds will be ready to weave on and will be finished in class. We will talk about how to dye gourds using Brusho watercolors.  

Teacher provides: All supplies including gourd, all weaving supplies and beads for rim.

Students provide:  Old towel to put on lap. You will be working with wet reed.

Students will complete the project.

Any level can do this.

Walk-ins accepted if class is not full.

 

 SATURDAY, AUGUST 19

 

SA 1 BrysonSA- 1

Wood Burn / Transparent Acrylic Lizard

8:00 am – 5:00 pm

$70  ($72 Paypal)

Robin Bryson  This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Learn how to create a rock shape look on the top of the gourd and learn to lightly wood burn a lizard and enhance the design with transparent acrylic.

Teacher provides: Pattern, Transparent Acrylic (colors, rich brown, Leaf; which is green, white and black; and Formula 49, micro brushes, piece of glass to place for the paint pallet, fake cactus and tutorial.

Students provide: A clean cut gourd 7” - 9”height, carving tool and bits, sand paper, Transparent Acrylic (colors, rich brown, leaf; which is green, black and white) Formula 49, (If you do not have them you can purchase them at Welburn’s online, teacher will have them for students who do not; heat gun, temperature controlled wood burner with a small rounded skew. Students to bring a mini hand saw if they have one, I will be bringing mine also to share. 

Students will complete the project.

Any level can do this.

Walk-ins accepted if class is not full but they will need to bring a gourd. Some will be available for purchase at the festival in the vendor area. 

 

SA 2 ReichertSA-2

Monster Gourd House

9:00 am – 5:00 pm

$85  ($88 Paypal)

Dee Reichert              This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Tired of fairy houses? Well, then! Let’s do Monster Houses! This fun class will give you experience in carving, ink dying, sculpting with polymer clay and assemblage and you get to go home with a finished product. You will carve and stipple the openings for the eyes and hands and make them look as if the monster is coming out of a broken rock or rotten piece of wood. Once the gourd is carved you will stain the outside of the gourd. Polymer hands and eyeballs will be demonstrated only and will be furnished for your project. This is a fun project just in time for Halloween!

Teacher provides: Apoxie Sculpt, wood stain, ink dyes, spray sealer sculpted eyeballs, hands, grasses and mosses, sticks, cotton batting, etc.

Students provide: Any size and shape gourd (cut, cleaned and sprayed black inside and blemishes are encouraged), small electric saw (Micro Mark), carving tools with large, medium, small and tiny ball cutting burrs, apron dust mask, protective eye wear, baby wipes, pencils and E6000 glue.

Students will complete the project.

Any level can do this.

No walk-ins.

 

T 6 Hobbs SA 6

SA-6

Coiling & Powdered Pigments on Gourds

8:00 am - 5:00 pm

$55  ($57 Paypal)

Karen Hobbs  This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Have you ever wanted to experiment with those multi-colored powders before        you purchased? Well here’s your chance! Come play in this fun class to see how many of the ways to mix and match and create a custom look. When you are happy with your custom creation, the gourd’s surface will be sealed. Students will continue by learning the coiling technique with variegated ribbons.

Teacher provides: Pattern, pigments, sealer, gloves, coiling materials and embellishments. A few Dremels to share for those who need them, 3/16 bits.

Students provide: 6-8” diameter gourd x 6” tall, clean, cut with wavey around the top. (refer to the picture) Bring Dremel for drilling holes around the top edge, or you can pre drill with 3/16 bit ¼” from top and ¼” apart.  Paint inside and out with flat black paint.

Students will complete the project.

Any level can do this.

No walk-ins.

 

SA 2 GuidrySA-9

Wood Burned Leather Look

1:00 pm - 5:00 pm

$65  ($67 Paypal)

Shelia Guidry  This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Using a wood burner that has temperature control (such as Razortip, Everglades, Burnmaster, etc) flowers and leaves will be burned to resemble tooled leather. After the wood burning, the background around the leaves and flowers will be carved. If you prefer, the background can be dyed instead of carving. The outer oval around flower area has copper foil and students will be given the foil to glue on gourd at home but instructor will demonstrate how to use foil.

Teacher provides: Instructor will provide gourd, instructions, pattern (already traced on gourd), Memories inks to use to dye gourd, copper or gold foil to put on oval around leaves. I will have carving burs for sale for anyone who does not have some to carve area around flowers and leaves.

Students provide:   Students will need carver and small round bits if you want to carve background area around leaves and flowers ( I will have bits for sale), wood burner that has temperature control (such as Razortip, Everglades, Burnmaster, etc)  wood burning pen to shade with- I used a writing tip pen for this piece but a small round ball tip or bent spear tip will work.

SA 9 SheliaSA 9b SheliaSA 9a Shelia                                

Writing Tip pen (not Sharp)                     Ball tip(small)            Round Bent Spear Shader           

Students will not complete the project in class.

Any level can do this.

Walk-ins welcome if class is not full.

 

SUNDAY, AUGUST 20

  

SU 1 BrysonSU-1

Pointillism Eagle (Pen & Ink) Techniques

8:00 am - 3:00 pm

$65  ($67 Paypal)

Robin Bryson  This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: In this informative class you will easily transfer your design onto the gourd. Learn the technique on how to see shapes and manipulate the pen for shading, all done in dots to create a stunning eagle.

Teacher provides: Pattern, pen & tutorial.

Students provide: A cut and cleaned gourd, the pattern size is 6” height and 5” width, size of the gourd should be at least 7 1/2 “ tall or taller if you wish later to add embellishments to your gourd.

Students will complete the project.

Any level can do this.

No walk-ins.

 

SU 2 GuidrySU-2

Under the Sea

8:00 am - 1:00 pm

$75  ($77 Paypal)

Shelia Guidry  This email address is being protected from spambots. You need JavaScript enabled to view it.

Description: Students will learn to wood burn seahorses and a seashell. Then learn how to carve background around seahorses. You will not have time to finish all the carving in class but carve enough to learn the technique. I will demo how to paint and high lite the carved background.  And the next step we will do in class is use Brusho Watercolors to paint the rest of the gourd. If you have never used Brusho crystals, this will be an excellent way to try them. I will demo how to use gold foil. You will need to spray seal finished gourd when you get home.

Teacher provides: gourd, Brusho crystals, plastic gloves, gold foil.

Students provide: Wood burner, skew wood burning pen, a writing tip or small ball tip or other wood burning pen to shade with. A carver and bit to remove outer shell of gourd and small round bit to carve texture (I use double cut bits and will have them for sale – if you have never used double cut bits, you will be amazed how good they cut). The Holtons will have wood burners, wood burning pens and carvers and for sale at the Festival.                      .

Students will not complete the project in class.

Any level can do this.

Walk-ins welcome if class is not full.

 

 

 

 

Back to top
Back to top